Walkie stacker

Name: Walkie stacker
SKU: p1_0Cqz6QrN396WatssdyaL08jCtdk
Availability: InStock

An electric walkie stacker for controlled pallet lifting and short-distance movement in warehouses, factories and dispatch areas.应用场景图是从

XC-CDD15

Core parameters

Full specifications

Payload: 1.5T
Operation Type: All-electric pedestrian type
Braking method: Electronic brake

QuantityUnit: Units

Application-Based Selection

Load Requirement: Confirm pallet weight and load center.
Lift Requirement: Confirm target lift height and mast clearance.
Route Check: Verify aisle width, floor condition and working slope.
Delivery Confirmation: Confirm battery, charger and service scope.

Controlled Electric Travel

Electric drive supports routine short-distance pallet handling.

Stable Hydraulic Lifting

Hydraulic lifting supports controlled load elevation within rated limits.

Operator-Focused Controls

Accessible controls support travel, steering and lifting operations.

Application-Based Selection

Confirm load, lift height, route and duty cycle before ordering.

XC-CDD15 1.5-Ton Walk-Behind Electric Stacker

Electric Pallet Stacking and Material Handling

XC-CDD15 is designed for pallet transport and stacking in warehouses, workshops and prepared yards. Confirm rated load, load center, lift height, aisle width, floor condition, battery configuration and operating cycle before ordering.

1.5-Ton Walk-Behind Electric Stacker Application 1
1.5-Ton Walk-Behind Electric Stacker Application 2
1.5-Ton Walk-Behind Electric Stacker Application 3
1.5-Ton Walk-Behind Electric Stacker Application 4
1.5-Ton Walk-Behind Electric Stacker Application 5
1.5-Ton Walk-Behind Electric Stacker Application 6
1.5-Ton Walk-Behind Electric Stacker Application 7
1.5-Ton Walk-Behind Electric Stacker Application 8

1.5-Ton Walk-Behind Electric Stacker Application 7

1.5-Ton Walk-Behind Electric Stacker Application 8

1.5-Ton Walk-Behind Electric Stacker Application 1

1.5-Ton Walk-Behind Electric Stacker Application 2

1.5-Ton Walk-Behind Electric Stacker Application 3

1.5-Ton Walk-Behind Electric Stacker Application 4

1.5-Ton Walk-Behind Electric Stacker Application 5

1.5-Ton Walk-Behind Electric Stacker Application 6

1.5-Ton Walk-Behind Electric Stacker Application 7

1.5-Ton Walk-Behind Electric Stacker Application 8

1.5-Ton Walk-Behind Electric Stacker Application 1

1.5-Ton Walk-Behind Electric Stacker Application 2

Specifications & Structural Decomposition

Product Structure

Steering Tiller Assembly
The walk-behind tiller places directional and operating controls within direct reach.
Power Unit Cover
The formed outer cover encloses the central power-unit area while keeping the profile compact.
Mast and Lift Assembly
The upright mast guides vertical carriage travel and supports controlled fork positioning.
Mast Safety Guard
The open mesh guard separates the operator side from visible moving lift components.
Fork Carriage
The carriage links the fork pair to the mast and maintains their working alignment.
Chassis and Wheel Base
The low chassis supports the main assemblies and keeps the wheels aligned beneath the unit.
Paired Fork Assembly
The matched forks enter pallet openings and provide the direct load-supporting surface.

General information

Payload: 1.5T
Operation Type: All-electric pedestrian type
Braking method: Electronic brake
Vehicle curb weight: The base weighs approximately 510 kg.
Fork height above ground: 85mm
Drive motor power: 48V1500W
Lifting pump power: 48V2200W

General instructions

Simplified explanation

Product Attachments or Core Configurations

Traction Battery Pack

The enclosed battery pack supplies stored electrical energy for the drive and lift system, with a serviceable housing for routine access.

Hydraulic Side Support Leg

The hydraulic side-support assembly provides an adjustable stabilizing contact for compatible wide-load or pallet positioning tasks.

Control Tiller

The tiller groups steering and lift controls within the operator zone, supporting deliberate travel, alignment and load handling during routine stacker work.

Fork Assembly

The paired steel forks provide the primary pallet interface, supporting suitable loads while the mast and lift system position them at the required working height.

Simple Side Support Leg

The support leg and caster assembly adds a visible stabilizing contact beside the machine, helping maintain a controlled stance during compatible pallet positioning.

Lift Chain and Pulley Assembly

The chain and pulley route transfers lifting motion through the mast, supporting guided vertical travel of the fork carriage.

Lift Cylinder

The hydraulic cylinder converts pressure into lifting movement, helping the fork carriage rise and lower in a controlled operating sequence.

Traction Battery Pack

The enclosed battery pack supplies stored electrical energy for the drive and lift system, with a serviceable housing for routine access.

Hydraulic Side Support Leg

The hydraulic side-support assembly provides an adjustable stabilizing contact for compatible wide-load or pallet positioning tasks.

Control Tiller

The tiller groups steering and lift controls within the operator zone, supporting deliberate travel, alignment and load handling during routine stacker work.

Fork Assembly

The paired steel forks provide the primary pallet interface, supporting suitable loads while the mast and lift system position them at the required working height.

Product Video

00:33

XC-CDD15 - Exterior Static Display

The red sheet metal is eye-catching and aesthetically pleasing, with a compact body that looks sleek from every angle.

XC-CDD15 - Exterior Static Display

00:33The red sheet metal is eye-catching and aesthetically pleasing, with a compact body that looks sleek from every angle.

XC-CDD15 Full Operation Demo

00:49Shows pallet handling, fork lifting, straight travel and handle control.

包装

00:33Machines braced inside containers and shipped by road and sea — tracked all the way to your site.

Real Factory Footage

Real on-site records from our factory, offering a practical view of our production capability and delivery readiness.

Factory Scene 2

0:00 / 0:00

Product Review

Product Inspection

We centrally purchase equipment, test the data and the machine, then publish the models that clear our review. You get a shorter path from "could work" to a quote your team can act on.