Upper metal cover with the visible ventilation openings above the enclosed cutting body.
Mowing Between Orchard Rows
Grass Care Across Working Sites
Mowing Lawns, Rows and Grass Strips
Use the tracked mower for planned grass-cutting passes along lawn edges, between orchard rows, through solar-array aisles and beside paths. The cutting body enters the standing grass ahead of the tracks, following the mowing lane while the trimmed strip continues behind the machine.
- Lawn Maintenance
- Orchard Upkeep
- Solar Site Care
- Verge Maintenance
Cutting Along the Grass Edge
Following a Pathside Grass StripMowing Between Orchard Rows
Trimming Solar Array AislesCutting Along the Grass EdgeFollowing a Pathside Grass StripSpecifications & Structural Decomposition
Product Structure Diagram
- Vented Upper Cover
- Rear Control Panel
Rear panel carrying the visible display and red emergency-stop button.
- Right Track Assembly
Complete right rubber track and wheel-frame assembly at the corresponding chassis side.
- Left Track Assembly
Complete left rubber track and wheel-frame assembly at the corresponding chassis side.
- Curved Cutting Guard
Curved protective guard bordering the front edge of the low cutting body.
- Remaining Cutting Chassis
Closed cutting body and chassis retained as one assembly beneath the upper cover.
General information
- Total Machine Weight
- 605
- Power
- 6.5KW
- Edge Banding Speed
- 0-30
- Air Source Pressure
- 0.6-0.8mpa
- Power Supply Voltage
- 380V/Three-Phase Four-Wire (3 Live Wires + 1 Neutral Wire)/50Hz
- Hot Melt Adhesive Type
- PUR/EVA
- Edge Banding Tape Thickness
- 0.5-2.5 (depends on edge banding material)mm
General instructions
Simplified explanationCore Component Details
We're here to help
Our team is ready to advise you on the best product configuration and procurement plan.
info@eascoutia.com400 158 5899Frequently Asked Questions (FAQ)
Which cutting blade is used?
A straight flat blade is specified within the low cutting body, behind the curved front protective guard.
How wide is the cutting pass?
The specified cutting width is 1000 mm. Check the complete machine clearance for narrow passages and turning areas.
How is the cutting height set?
Cutting height is specified at 5-200 mm. Remote height adjustment is provided together with remote start and shutdown.
What is on the rear panel?
The rear panel groups a visible display, a red emergency-stop button and the other existing controls in one location.
Which battery powers the mower?
The electric system uses a 64 V lithium iron phosphate battery. The tracked travel system has dual 1500 W drive motors.
Related Products
