Complete diesel power assembly with electric starting and its attached external components.
Mowing Between Orchard Rows
Grass Care Across Working Sites
Mowing Lawns, Rows and Grass Strips
Use the tracked mower for planned grass-cutting passes along lawn edges, between orchard rows, through solar-array aisles and beside paths. The cutting body enters the standing grass ahead of the tracks, following the mowing lane while the trimmed strip continues behind the machine.
- Lawn Maintenance
- Orchard Upkeep
- Solar Site Care
- Verge Maintenance
Cutting Along the Grass Edge
Following a Pathside Grass StripMowing Between Orchard Rows
Trimming Solar Array AislesCutting Along the Grass EdgeFollowing a Pathside Grass StripSpecifications & Structural Decomposition
Product Structure Diagram
- Diesel Power Assembly
- Side Guard Pair
Pair of slotted side guards at the opposite sides of the diesel power assembly.
- Cutting Head Housing
Front cutting head cover and its end supports, separated from the cutting rotor.
- Flail Blade Rotor
Transverse cutting rotor carrying the visible pivoting flail blades.
- Right Track Assembly
Complete right rubber track and wheel-frame assembly at the corresponding chassis side.
- Left Track Assembly
Complete left rubber track and wheel-frame assembly at the corresponding chassis side.
- Remaining Main Frame
Remaining main frame with existing mounting points and the rear enclosed control box.
General information
- Cutting Width/mm
- 1000mm
- Track Type
- High-Tooth Track
- Applicable Scenarios
- Mowing/Land Clearing/Branch Chipping
- Dimensions
- 1850*1160*750
- Engine Type
- Water-Cooled Single-Cylinder Diesel Engine
- Cutting Height
- 5-400mm
- Total Machine Weight
- 500-600kg
General instructions
Simplified explanationCore Component Details
We're here to help
Our team is ready to advise you on the best product configuration and procurement plan.
info@eascoutia.com400 158 5899Frequently Asked Questions (FAQ)
What cutting widths are listed?
The mower is specified with 1000 mm or 1200 mm cutting-width configurations. Confirm the chosen width for the intended route.
How is cutting height set?
Remote-controlled hydraulic lifting adjusts the cutting head. The specified cutting height range is 5-400 mm.
What type of blades are fitted?
Vertical flail blades are specified, mounted on the transverse front rotor ahead of the two rubber tracks.
How does the engine start?
The water-cooled diesel power system uses electric starting. Its formed upper cover surrounds the engine assembly.
Which system voltage is used?
The generating system is specified at 24 V, with 48 V optional. Match the electrical configuration to the selected mower.
Related Products
