Name: Compact Excavator
SKU: p1_0Cqz9g22rbOQYg
Availability: InStock

Product Video

Grading Mountain Access Road Drainage

Precise Trenching Along Greenhouse Exterior

Clearing Silt from Farm Drainage Ditches

Controlled Rubble Cleanup in Tight Yards

Grading Mountain Access Road Drainage

Precise Trenching Along Greenhouse Exterior

Clearing Silt from Farm Drainage Ditches

Controlled Rubble Cleanup in Tight Yards

Product Advantages

Excavator track performance test. Powerful ground‑gripping force, stable travel on complex terrain, wear‑resistant, suitable for muddy,.

Specifications & Structural Decomposition

Product Structure Diagram

Bucket and Thumb Assembly
The digging bucket and opposing mechanical thumb form a controlled working end for irregular material.
Hydraulic Boom Assembly
Pinned boom sections, cylinders, and routed hoses transfer controlled movement toward the bucket.
Four-Post Canopy
The molded roof and four upright supports define the open operator area and overhead structure.
Operator Station
The seat, twin control consoles, and operating levers create the machine's central control position.
Engine Hood Assembly
The shaped rear hood encloses the service area and provides a removable exterior access section.
Rubber Track Undercarriage
Twin rubber tracks and the lower frame support travel, ground contact, and upper-body rotation.
Front Dozer Blade
The front-mounted blade provides a separate surface for grading loose material and shaping the work area.

General information

Whole‑machine Working Weight(kg): 1800
Bucket Capacity(m³): 0.02
Travel Speed Low/High(km/h): 2
Gradeability(%): 30°
Swing Speed(r/min): 9
Bucket Max Digging Force(KN): 10
Arm Max Digging Force(KN): 6

General instructions

Simplified explanation

Product Attachments or Core Configurations

Screening Bucket

Slotted bucket retains larger pieces while allowing loose fine material to pass through its openings.

Small Digging Bucket

Compact bucket supports localized excavation where a smaller working width improves control.

500–1000 mm Toothless Bucket

Smooth cutting edge across the shown width range supports ditch finishing and loose-soil cleanup.

600 mm Tooth Bucket

Defined tooth points and the shown bucket width support general digging and material pickup.

Auger

Rotary drilling tool produces compact round holes for posts, planting, and prepared-site work.

Clamshell Grab

Two opposing jaws close around loose material for controlled pickup, transfer, and placement.

Hydraulic Breaker

Hydraulic impact tool concentrates repeated force at its tip for localized hard-material breaking.

Hydraulic Quick Coupler

Hydraulic coupling interface supports compatible tool changes with reduced manual pin handling.

Hydraulic Thumb

Hydraulic opposing thumb closes toward the bucket to retain rocks, branches, and irregular debris.

Hydraulic Tilt Bucket

Tilting bucket changes its working angle for slope shaping, ditch finishing, and surface trimming.

Log Grapple

Curved grapple arms hold logs and branches for controlled lifting, sorting, and site cleanup.

Mechanical Quick Coupler

Mechanical coupler provides a compact pinned interface for changing compatible working tools.

Mechanical Thumb

Fixed-link thumb works against the bucket to help retain rocks, branches, and uneven material.

Narrow Bucket

Slim toothed bucket concentrates the cutting width for narrow trenches and confined excavation lines.

Pallet Forks

Twin fork tines support stable palletized loads during short handling moves on prepared ground.

Rake

Open tines gather roots and loose debris while allowing smaller soil particles to pass through.