The textured round pad forms the upper contact surface for a suitable reinforced lifting point.
Simplified explanationBottle Jack — Stable Green Lift
Gloss green bottle jack with solid base—compact footprint for steady lifting in tight spots.
Compact Hydraulic Support at Reinforced Lifting Points
Controlled Lifting for Vehicle, Trailer and Workshop Maintenance
Place the jack upright on a hard, level surface and align the saddle with a reinforced lifting point. Chock wheels where applicable, operate the removable handle smoothly and keep the load within the 10-tonne rating. After lifting, support the load with appropriately rated stands before inspection or work. Never place any part of the body under a load supported only by the jack.
- Roadside Wheel Service - Lifting a Vehicle at a Reinforced Jack Point
- Roadside Wheel Service - Lifting a Vehicle at a Reinforced Jack Point
- Farm Equipment Service - Lifting an Implement Axle on a Concrete Floor
- Workshop Machinery Setup - Making a Controlled Lift for Machine Placement
Product Advantages
Close the release valve, pump the handle, and the ram rises smoothly—simple lift on the labeled 10t bottle jack.
Specifications & Structural Decomposition
Product Structure Diagram
- Black Textured Saddle Pad
- Polished Lifting Ram
The steel ram extends vertically to provide the specified hydraulic lifting travel.
- Green Collar / Gland Nut
The threaded collar secures and guides the upper ram area at the top of the hydraulic body.
- Cast Base and Green Hydraulic Body Assembly
The wide cast base and sealed hydraulic body remain one central assembly; closed hydraulic internals are intentionally not illustrated.
- Pump Plunger
The small polished plunger transfers repeated handle movement into hydraulic pumping action.
- Handle Socket and Linkage Assembly
The socket accepts the removable operating handle and the linked lever drives the pump plunger.
- Release Valve Screw
The front screw controls hydraulic release for lowering when operated according to the product instructions.
General information
- Model
- CL713410
- Adjustable Height
- 60 mm
- Net Weight
- 6.00 kg
- Product Type
- Hydraulic Bottle Jack
- Rated Lifting Capacity
- 10 t
- Minimum Lifting Height
- 200 mm
- Hydraulic Lifting Height
- 160 mm
General instructions
Product Video
Bottle Jack — Stable Green Lift
00:11Gloss green bottle jack with solid base—compact footprint for steady lifting in tight spots.
Release Valve — Lift Control at Hand
00:23Thumb the release valve and pump socket for controlled lift and lower—simple bottle-jack control.
Core Component Details
We're here to help
Our team is ready to advise you on the best product configuration and procurement plan.
info@eascoutia.com400 158 5899Frequently Asked Questions (FAQ)
What is the rated capacity?
The supplied specification lists a rated lifting capacity of 10 tonnes. Never exceed this rating and confirm that the lifting point and supporting surface are suitable for the load.
What are the listed height specifications?
The listed minimum height is 200 mm, hydraulic lifting height is 160 mm and adjusting height is 60 mm. Confirm available clearance and required travel before use.
How should the jack be positioned and operated?
Use the jack vertically on a hard, level surface. Align the saddle with an approved reinforced lifting point, insert the removable handle into the pump socket and operate it smoothly while monitoring the load.
Which hydraulic oil is recommended?
The supplied material recommends No. 32 hydraulic oil. Service and fluid replacement should follow the product instructions and applicable maintenance practice.
Can a person work under a load supported only by this jack?
No. After lifting, transfer the load to correctly rated support stands before inspection or repair. Keep people clear while raising or lowering the load.